SINGLE-PHASE

Electrocube carries an extensive line of more than 400 precision UL-recognized and ULc-approved RC Networks designed to prevent or substantially minimize the occurrence of arcing and noise generations in relay and switch contacts. They are manufactured as both off-the shelf and made-to-custom design specifications from one network to 40 networks in a container. Made in the U.S., there are thousands of unique suppression designs to eliminate surges produced by relays and solenoids.

SINGLE-PHASE HEAVY DUTY

Electrocube designs the UL-recognized and ULc-approved RG1676 RC Network for arc and noise suppression in heavy duty applications that require greater magnitudes of power dissipation. Made in the U.S., arc suppressing RC Networks consist of specially designed precision capacitors and resistors connected in a series. Spark discharges and induced noise are absorbed over a wide range by the accumulation characteristic and impedance of the capacitor. During this process, the RC time constant delays and averages surge voltage and oscillations.

For questions and/or a quote, contact Sales at 909-595-4037 or info@electrocube.com.

Features

• All resistors rated 0.5 watt
• Networks with MTW leads have nominal lead spacing
• Other lead lengths and resistor values available

Specifications

• Maximum peak surge voltage is 1.5 times the rated DC voltage
• Temperature range: -40°C to +80°C

Features

• Due to mass and weight, mounting holes at end of case to secure to chassis
• All leads #18 AWG MTW, except -24 through -33 and -61, which are #16 AWG MTW
• Special lead lengths available
• Other values of wattage and resistance or capacitance and voltage available

Specifications

• Maximum peak surge voltage is 1.5 times the rated DC voltage